Waste Aluminum fin stripper Machine
Can peel or strip Aluminum finned tubes with diameter 16-32mm.
Introduction：
Waste Aluminum fin stripper Machine can peel Aluminum finned tubes (diameter 16-32mm), and cables (10-60mm)
How to operate machine:
1. Connect the power supply and verify whether the current and switch are normal.
2. The distance between the two knives is adjusted to be the same as the diameter of the inner tube of the aluminum finned tube.
The distance between the two knives can be adjusted at will.
Adjust the front and back nuts on both sides to bring the knives on both sides to the right distance, and then fix them with hex screws.
The distance to the tube and the knife is the same. And then fix it again
3. Locate the backer, jam the aluminum finned tube, and then fix the screws.
4. Turn on the switch and start the operation.